Home | Products | Spin-On filters
2D/3D CAD Components
Spin-On filters are used as process and safety filters to protect individual pumps, valves or the entire hydraulic circuit from contamination as per ISO 4406. Versions are available with operating pressures ranging from 174 to 508 psi. In-line Spin-On filters can be used for the following purposes :
  • Suction filters
  • On the return circuit, for mounting on the line or on the tank cover
  • In-line for low and medium pressures
Spin-On filters are available in 4 configurations :
  • Single cartridge in-line
  • In-line with two parallel cartridges on the same axis
  • In-line with two parallel cartridges mounted side by side
  • With single cartridge flange for installation to the tank cover
All versions may be equipped with visual and/or electrical blockage indicators


 

MPS

Either suction or return line in-line mounted Spin-On, working pressure 12 bar (174 psi), flow rates up to 300 l/min (80 gpm), threaded connections from 3/4” and 1 1/2” BSP/NPT/SAE and flanged connections 1 1/2” SAE 3000 PSI.
MST

Tank mounted return filter Spin-On, working pressure 12 bar (174 psi), flow rates up to 200 l/min (53 gpm), threaded connections from 3/4” and 1 1/2” BSP/NPT/SAE and flanged connections 1 1/2” SAE 3000 PSI.
MSH

In-line filter Spin-On, working pressure 35 bar (508 psi), flow rates up to 250 l/min (66 gpm), threaded connections from 3/4” to 1 1/2” BSP/NPT/SAE.
CT - CH - CS - CG

Filter element Spin-On, working pressure 12/35 bar (174/508 psi), flow rates up to 250 l/min (66 gpm), threaded connections 3/4” BSP 1” - 12 UNF 1 1/4” BSP 1 1/2” - 16 UN
NEW DEL - DVL Differential indicator low pressure - low cost - in style optical and electrical

To properly maintain your system to the correct ISO 4406 contamination class MP Filtri recommends the use of filter provided with the correct clogging indicator.